Product was successfully added to your shopping cart.

FujiFilm Flash EF-X20 TTL Flash

Be the first to review this product

  • FujiFilm Flash EF-X20 TTL Flash FujiFilm Flash EF-X20 TTL Flash
  • FujiFilm Flash EF-X20 TTL Flash FujiFilm Flash EF-X20 TTL Flash

Quick Overview

  • 2 years Australian Warranty

  • Compact and lightweight

  • Built-in wide diffuser

  • Built-in "Slave Mode"

RRP: $359.00

Special Price: $279.00

SAVE: $80.00 (22.3%)

Availability: In stock

or 4 interest free payments of 69.75
Learn more


Exposure setting dial

Enables flash compensation from -1EV to +1EV in increments of 1/3 stops in the TTL Auto mode.

Enables flash output levels of 1/1, 1/2, 1/4, 1/8, 1/16, 1/32 and 1/64 in the Manual mode.

Immediate visual confirmation of settings even when the unit is turned OFF.

Lever for setting wide panel

Raise the lever to support a focal length of down to 20mm (35mm film equivalent). *

*The guide number becomes 12.

Mounting lock releasing button

Featuring a new mechanism that automatically locks the shoe-mount flash unit when it is placed on the hot shoe.

The mechanism firmly fixes the flash unit in place without operating the locking bar or tightening the screw, just easy attachment.

Wireless slave flash selector

To use the unit as a master flash, set the switch to X.

To use the unit as a slave flash, set the switch to N-MODE if the master flash is the "non-preflash" type, and

P-MODE if the master flash is the "preflash" type.

The unit fires automatically upon detecting light from the master flash.


Compact and lightweight, yet offers a strong light intensity of guide number 20.


With the FUJIFILM's unique flash control technology "i Flash technology", it can automatically optimize the amount of light suitable to every shooting condition.


Crafted from premium metal materials to compliment the design of the X-Series cameras.


Ergonomic design for responsive dial control.


Built-in wide diffuser can be selected by using lever on the side of the flash.


Built-in "Slave Mode" for advanced photography.


Number of uses/Recycling time

Number of uses **

Recycling time ***

AAA alkaline batteries x 2



AAA Ni-MH batteries x 2



  • **Battery endurance measured using fresh batteries manufactured within the previous three months.
    The number of uses is the number of times the flash can be fired at intervals of 30 seconds; the count ends when the TEST button (READY lamp) takes more than 30 seconds to light.
  • ***The recycling time is the time needed after the flash fires for the TEST button (READY lamp) to light, as measured under the conditions described above.




FinePix X100 / HS30EXR / HS33EXR / HS25EXR / HS28EXR / HS20EXR / HS22EXR / SL300 / SL305 / SL280 / SL260 / SL240, FUJIFILM X10, FUJIFILM X-S1, FUJIFILM X-Pro1, FUJIFILM X-E1


Model Name


Guide Number(ISO100,m)

20(12 when Wide panel is used)

Color temperature

Approximately 5600K at full power

Manual flash output

1/1, 1/2, 1/4, 1/8, 1/16, 1/32, or 1/64

Exposure compensation

+1 to -1 in increments of 1/3 EV

Slave mode

Available (per-flash and non-pre-flash control supported)

Power source

Two AAA alkaline or Ni-MH batteries

Operating temperature

0°C to 40°C (32°F to 104°F)

Dimensions(H x W x D)

36.0 x 59.5 x 50.0mm(1.4 x 2.3 x 1.9in)


Approximately 100g(3.5 oz), excluding batteries

  1. Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register